Timco Plasterboard Screws Self Drilling (Silver) - 3.5 x 38mm (1000 Pack Box) (00038PSDD)
Timco Self Drilling Drywall Screws are great at securing sheets of plasterboard to metal track systems with a maximum thickness of 2mm. Engineered specifically as screws for plasterboard these 38mm drywall screws are fully threaded with a bugle head and drill-shaped point.
- Fine Thread - since metals are usually much denser than wood the 60° twin-thread can create more layers of resistance to hold the screw in place without damaging the structure of the substrate.
- Bugle Head - similar to a countersunk head in that the cone-shaped head will sit just below flush with the plasterboard but adapted to prevent tears in the outer paper layer encasing the gypsum board.
- Self-Drilling Point - the drill shaped point of these screws acts as a pilot drill whilst driving which allows use with thicker metals and improved productivity.
- Silver Zinc Finish - this coating will help protect the carbon steel screw from corrosion since exposure to oxygen or dampness will corrode zinc at a much slower rate.
- Free PH2 Driver Bit - includes the Phillips No. 2 bit required to drive these screws into place.
- Complies with BS EN 14566:2008 - passes the European standard for gypsum plasterboard mechanical fasteners which provides the benchmark regarding quality and performance.
- A1 Fire Classification - this dictates that the materials used are completely non-combustable.