Simpson Strong-Tie Adjustable Girder Truss Hanger 50mm (1 Unit) (THA50)
Simpson Adjustable Girder Truss Hanger THA which measures 50 x 63 x 220 x 107.5mm is a one-piece metal joist hanger, designed to support trussed rafters and composite timbers. Easy installation with a high level of support. This item should be installed with the use of 3.75 x 30mm square twist nails and can be installed as a wrap-over or face fix. The THA is a one-piece joist hanger that supports composite timbers and trussed rafters made from wood members. Adjustable Girder Truss Hanger THA 50 x 63 x 220 x 107.5mm can be mounted in a variety of ways for increased load capacity. Refer to the table below for repair alternatives.
- The location tab facilitates the carrying member's alignment.
- Choice of installation standards to suit wrap-over or face fix.
- Speed prongs allow the hanger to be positioned without nails prior to installation completion.
- The strap is imprinted with nailing schedules to deliver the relevant information to site workers.
- By widening the nail spacing and providing a larger bearing area on the supporting girder, the characteristic wide strap improves the performance of the important component of the connection.
Delivery rates are automatically calculated at the checkout and depend on destination, size, content and the value of the order.
Ireland Shipping: Estimated €13 exVAT
2 to 3 working days delivery time
Europe Shipping: Estimated €16 exVAT
4 to 5 working days delivery time
Worldwide Shipping: Calculated
5 to 7 working days delivery time depends on destination, size, content and the value of the order.