Mafell MT55cc Circular Plunge-Cut Saw 240V + 2 x 1.6m FS Guide Rails KIT (917632 + 204805)
The Mafell MT55cc 230v Plunge-Cut Saw is capable of performing plunge cuts, as well as parting, bevel, and angled cuts, with the highest degree of precision and without tearing the material. A single action is all that is required to rapidly activate the scoring mechanism. The MT 55 cc thus cuts visible edges as cleanly as a stationary machine, even if the splinter guard is worn, and it includes constantly variable speed for a variety of materials and saw blades. This allows the MT 55 cc to accommodate a wide range of applications. The range of the cutting depth has been increased to 57 millimetres, which is approximately 2 1/4 inches. The cutting angles that can be achieved using bevels are almost unrestricted as a result of the cutting system's cutting-edge tilting mechanism. Solid wood, cement fiberboard, melamine resin panels (Trespa), oriented strand board (OSB), gypsum fiberboard, plastics, facade boards, and other types of board materials are all excellent candidates for usage with the M917632 + M204805 combination.
Pushing in one button and pulling up on the lever on the saw handle is all that is required to bring the blade housing down. Spindle up will activate on its own and will disengage the switch for your protection if it is already engaged. The answer to your question as to why the blade is completely encased is fairly straightforward: it allows for greater dust extraction. At this point, there is no other route for the dust to take other than via the space left between the rails. There is a workaround for that as well; simply pull the splinter guard up, and the problem will be solved. The scoring mechanism on the Mafell MT55CC may be immediately engaged with only a single motion, making it incredibly convenient. Additionally, it is able to cut visible edges with the same level of precision as a fixed machine. Even with the splinter guard in place, this objective can be accomplished. The Mafell MT55CC is able to carry out precise, clean cuts without causing any ripping in the material it is cutting.
Characteristics and Advantages
- Capability for highly fine adjustment of the cutting depth setting, for as when working with a blade that has been resharpened or with Fermacell.
- The saw blade cover is closed, and there is a slide bar at the saw-cut, so the amount of dust produced is kept to a minimum.
- The new CUprex-Compact motor that comes standard on the MT 55 cc allows for dramatically increased top speeds as well as a sufficient amount of power reserve.
- Precision down to the millimetre level can be achieved when setting the cutting depth. Turning the cursor to the right or left will, depending on the situation, reveal the precise cutting depth.
- The angle setting can be adjusted in two different locations for bevel cuts by giving a single locking screw a half turn in either direction.
- Cutting depth: 0 – 57 mm
- Cutting depth at 45°: 0 – 40.5 mm
- Tilt range: – 1 – 48°
- Nominal no-load speed: 3600 – 6250 1/min
- Nominal input: 1400 W
- Weight: 4.5 kg
- Universal motor: 230V / 50 Hz
What's in the box?
- 1 x MT55cc Circular Plunge Saw 240V
- 1 x Allen key 5mm
- 1 x TCT saw blade 162 x 1.2/1.8 x 20mm 48 alternating teeth for universal use with board materials
- 1 x TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ AT, 32 teeth, for fine cuts in wood
- 1 x Mains cable 4m GB 240 (UK Plug)
- 2 x F 160 FS Rails Guide
- 1 x F-VS Rails Connector
- 2 x F-SZ 180 MM Quick Clamps
- 1 x Rail Carry Bag
- 1 x T-Max Systainer
- Brand:
- Mafell
- SKU:
- M917632 + M204805
- Type:
- Corded Plunge Saw
- Model:
- MT55
- Voltage:
- 240V
- Hertz:
- 50Hz
- Power:
- 1400W
- Pack Type:
- Systainer
Ireland Shipping: Estimated €13 exVAT
2 to 3 working days delivery time
Europe Shipping: Estimated €16 exVAT
4 to 5 working days delivery time
Worldwide Shipping: Calculated
Terms and conditions
- Our price match promise applies to all UK-based retailers but not discount marketplaces or non-UK websites
- Price match should include any shipping charges applicable.
- Price should not be in clearance price, promotion offers, voucher discounts, etc.
- Item should be in stock with the competitor and TCO.