Mafell MT55cc Circular Plunge-Cut Saw 110V with US Plug Adaptor + 2 x 1.6m FS Guide Rails KIT (917636 + 204805)
It comes with a UK-to-US 110V adapter and can be used in the US or Canada. And you won't find it cheaper anywhere else.
Mafell MT55cc is a very impressive piece of equipment. It has been mastered to perfection and is accurate and strong. The Mafell MT55cc comes in the same T-Max Systainer as Festool, so it can be used with all T-Loc systems from Festool and Mirka. Mafell plunge cut saws can be used with Makita, Festool, and Bosch guide rails as well as Mafell rails. Other brands only let you tilt from +45 degrees to 0 degrees plus 1 degree undercut, but Mafell lets you tilt from +48 degrees to -1 degrees. Joints at 90 degrees are standard because they give you a nice place to put glue. The MT55cc can cut 57mm deep, while its competitors can only cut 55mm deep. There's a reason for it: when the saw is on the rail, it can still cut up to 51mm deep, which is enough to cut a 2" piece of wood. That's not something you can do with a Festool or Makita saw, is it?
A positive stop (every 1mm on the front of the saw) with a fine adjuster on the grub screw is another extremely useful feature. You can set the cutting depth on or off the rail by turning the depth indicator. When you use your saw on the guide rail, the cut line will be the edge of the rail, so it's easy to see. Most problems start when the piece is cut without using the guide rail and the saw is tilted. Most of the time, you can't see where the blade is going. Not with the Mafell MT55. There is a special line indicator on the front of the saw base that moves with the blade when you tilt the saw, so you always know where the cut line is. For your convenience, Mafell made a whole new way to change the blade.
Just push one button and lift the lever on the saw handle, and the blade housing will fall down. Spindle up works on its own, and the switch is turned off for your safety. If you're wondering why the blade is completely covered, the answer is simple: it helps get rid of dust better. Now, the only way for the dust to get out is through the space between the rails. There is a way to fix that, too. Just push the splinter guard down, and you're done. The scoring function on the Mafell MT55CC can be quickly turned on with just one movement. It can also cut edges as cleanly as a stationary machine. Even with the splinter guard on, this can be done. The Mafell MT55CC can make clean cuts with pinpoint accuracy and no tearing.
- Cutting depth: 0 – 57 mm
- Cutting depth at 45°: 0 – 40.5 mm
- Tilt range: – 1 – 48°
- Nominal no-load speed: 3600 – 6250 1/min
- Nominal input: 1400W
- Weight: 4.5 kg
- Universal motor: 110V / 50 Hz
What's in the box?
- 1 x MT55cc Circular Plunge Saw 110V
- 1 x Allen key 5mm
- 1 x TCT sawblade 162 x 1.2/1.8 x 20mm 48 alternating teeth for universal use with board materials
- 1 x TCT saw blade 160 x 1.2/1.8 x 20 mm (6 5/16 in.)/ AT, 32 teeth, for fine cuts in wood
- 1 x Mains cable 4m GB 110 (UK Plug)
- 1 x UK to USA 110V Plug Adaptor (TCO Brand)
- 2 x F 160 FS Rails Guide
- 1 x F-VS Rails Connector
- 2 x F-SZ 180 MM Quick Clamps
- 1 x Rail Carry Bag
- 1 x T-Max Systainer
- Brand:
- Mafell
- SKU:
- M917636 + M204805 + TCO-USA110VADAT
- Type:
- Corded Plunge Saw
- Voltage:
- 110V
- Hertz:
- 50Hz
- Power:
- 1400W
- Pack Type:
- Systainer
Terms and conditions
- Our price match promise applies to all UK-based retailers but not discount marketplaces or non-UK websites
- Price match should include any shipping charges applicable.
- Price should not be in clearance price, promotion offers, voucher discounts, etc.
- Item should be in stock with the competitor and TCO.